Fulltext results:
- Dynamic simulation of a building's thermal performance
- adiation in each period of time (nonlinear). The wall model uses not transfer functions but uses a forw... f simulated and measured temperatures within the wall), the focus is the whole building perspective (fi... The entire building defines the system boundary. All energy fluxes are part of the model, including all electric appliances. This makes it possible to simu
- Energy balances - Background
- d or cooled space" or more precisely: it includes all areas in a building in which comfortable thermal ... ould prevail. It is usually convenient to include all "passively heated" areas in the balance, if the b... on comfort conditions exists it is probably so small as to be of no practical significance."//\\ \\ ... (stationary) U-values be used in calculations at all? Isn't the heat storage more important than the
- Internal heat gains in relation to living area @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- The PHI points out that it is not permissible at all to use such high values for the planning of Passi... ncreased IHG should be performed especially for small dwellings. \\ \\ ==== 3 Approach for household ap... 250 W during 550 hours per person per year * Small devices 50 kWh per person per year (specified val... e the total water consumption of households and small consumers is 110 l/person/d on average [Schnieder
- PHPP - validated and proven in practice @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- easured results; - incidentally this was true for all building standards. \\ \\ |{{ :picopen: comp_PHPP... different users]]: This is actually the case for all energy standards and not specific for energy effi... ause even the highest consumption is still very small.\\ \\ ===== More accurate than conventional metho... ch the results of dynamic simulations [AkkP 13]. All simulation models that were used had been previou
- PHPP calculations in hot and humid climates @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- nd thus in the newest PHPP release, this aspect shall not be part of the report at hand. ===== Read mo... values for both sensible and latent cooling under all considered boundary conditions. The algorithm mod... assive_house_conference_contributions_4|List]] of all released conference proceedings of the 17th Inter
- The overall heat transfer coefficient or U-value @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- ====== The overall heat transfer coefficient or U-value ====== In the PHPP worksheet U-Values of all building elements of the building envelope, or, in other words, all building elements through which heat is lost, are... 108-4. For the certification of Passive Houses in all other countries, the lambda value determined as d
- Calculation guide for temperature reduction factors to temperature zone "X" in the PHPP "Areas" worksheet @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- fluence on the total specific heating demand is small or moderate. [[ https://database.passivehouse.... recommend ignoring the buffer zones and entering all envelope areas as adjacent to ambient. * If a
- “designPH” plugin for Trimble Sketchup @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- possible to visually verify in the 3D model that all the heat-loss surfaces have been correctly taken ... assive_house_conference_contributions_4|List]] of all released conference proceedings of the 17th Inter
- Variant calculations and economic assessment with PHPP 9 @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- _the_passive_house_planning_package|Overview]] of all articles on Passipedia about PHPP [[phi_publica... assive_house_conference_contributions_4|List]] of all released conference proceedings of the 18th Inter
- PHPP – Passive House Planning Package
- for different climatic regions around the world. All calculations in the PHPP are based strictly on th