Fulltext results:
- Thermal insulation
- well insulated. The building envelope consists of all the building elements which separate the inside f... -> Good thermal protection can be achieved for **all construction methods** and has already been succe... rmwork element technology, steel construction and all types of mixed constructions. -> An appropria... limate). These values are not only benchmarks for all construction methods but also the [[planning:ther
- Insulation works – Evidence no.1 "Measurements at a highly insulated wall" @planning:thermal_protection:thermal_protection_works
- vidence no.1 "Measurements at a highly insulated wall" ====== ===== Long-term measurements at exterior... insulated walls. The cross-sectional view of the wall is shown in the bottom right corner of the image.... of the cross section is the exterior side of the wall. The load carrying structure consists of a 175 mm lime sand brick wall (grayish blue). A 275 mm insulation layer has bee
- Don’t save on the insulation
- el of thermal protection ^Typical old\\ external wall ^Moderately insulated\\ external wall^Good insulation^ ^Illustration|{{ :picopen:24_hlz.png }}|{{ :pic... ) | ^Annual demand for heating oil\\ (per 1 m² wall)(( Calculation basis: average location in Germany... ubic metre of fuel wood\\ for the whole external wall;\\ this can be provided for everyone\\ through su
- Outdoor thermography @planning:thermal_protection:thermal_protection_works
- rared|infrared radiation (from Wikipedia)]] (IR). All objects surrounding us emit thermal radiation wit... ed_ir.png?463 }}|{{ :picopen:partially_insulated_wall.jpg?380 }}| |//**IR image taken during the applic... ffolding and the bags allow a good view of\\ the wall and will serve as points of reference for compari... eir emissivity. This value varies very little for all the\\ materials in this picture (except for the g
- Insulation vs. thermal mass @planning:thermal_protection:thermal_protection_works
- the effects of the thermal storage capacity of a wall and the heat gains from solar radiation are insufficiently, or not at all, taken into account by scientists. The author o... eantime, many new findings have become available, all of which support this publication. The full (Germ... And even after two weeks the temperature doesn't fall below 14°C. The few interior heat sources have a
- Energy use for heating in a well insulated new building @planning:thermal_protection:thermal_protection_works
- evidence_no.1_measurements_at_a_highly_insulated_wall| measurements at a highly insulated wall]]and it is based on the energy consumption data recorded in h... buildings in Germany; approx. 160 kWh/(m²yr).\\ All other values: energy use for heating measured in ... 9.2 kWh/(m²yr).**\\ //|\\ \\ The diagram says it all: * Existing buildings in Germany use an avera
- Comparison of in-situ measurements and hygrothermal simulations of four different interior insulation systems @planning:thermal_protection:thermal_protection_works:comparison_of_in_situ_measurements_and_hygrothermal_simulations_of_four_different_interior_insulation_systems
- often do not have any insulation on the exterior wall going along with low, uncomfortable surface tempe... lding physics, insulating the exterior side of a wall is the better solution. In many cases though, e.g... isk of damage by increased moisture contents. \\ All the above issues come together in the residential... nzollern-Höfe”, Ludwigshafen (left).** \\ \\ The wall construction after retrofit (with insulation boar
- Thermal protection in retrofits @planning:thermal_protection:thermal_protection_works
- nisation includes very good thermal insulation of all\\ exterior surfaces, including new windows and h... the room, condensation can be prevented – if the wall is well-insulated enough. You can find additional... e resultant surface temperatures within the home fall to 9°C, behind the cabinet in the corner the temp... shown here. By increasing the insulation of the wall, interior surface temperatures rise. Due to the
- Types of glazing and their specific values @planning:thermal_protection:windows
- ly than for any other building component. The overall heat transfer coefficient (U<sub>w</sub>-value) o... -15°C, the interior surface temperature does not fall below 17°C.** * Thus, there is no perceptible "... Of course, this result can only be achieved with all other Passive House criteria being fufilled at th... mage of a Passive House window from\\ the inside. All surfaces are pleasantly warm:\\ block frames, cas
- Thermal protection works
- tion works ====== How come there is any doubt at all that this obvious statement is true?\\ Whatever ... er buildings retrofitted with heat insulation. In all cases, this evidence is based on accurate scienti... vidence_no.1_ measurements_at_a_highly_insulated_wall |Evidence no.1]] - **Insulation works** - Temperature measurements at a highly insulated wall \\ \\ [[planning:thermal_protection:thermal_prote
- PHI window certification: previous success and new climate zones @planning:thermal_protection:windows:window_certification
- with the window frame surface area A<sub>f</sub>. All of these parameters are important because, on one... planning:thermal_protection:windows|Overview]] of all articles on Passipedia about windows [[planning:thermal_protection|Overview]] of all articles on Passipedia about "Thermal protection"... assive_house_conference_contributions_4|List]] of all released conference proceedings of the 18th Inter
- Windows
- :microsoft_word_-_01_fact-sheet_en_window-better-wall_kk.pdf|Is it problematic if the window is better than the wall? }} {{ :picopen:microsoft_word_-_07_window_step_