Fulltext results:
- Thermal insulation @planning:thermal_protection
- well insulated. The building envelope consists of all the building elements which separate the inside f... -> Good thermal protection can be achieved for **all construction methods** and has already been succe... rmwork element technology, steel construction and all types of mixed constructions. -> An appropria... limate). These values are not only benchmarks for all construction methods but also the [[planning:ther
- Insulation works – Evidence no.1 "Measurements at a highly insulated wall" @planning:thermal_protection:thermal_protection_works
- vidence no.1 "Measurements at a highly insulated wall" ====== ===== Long-term measurements at exterior... insulated walls. The cross-sectional view of the wall is shown in the bottom right corner of the image.... of the cross section is the exterior side of the wall. The load carrying structure consists of a 175 mm lime sand brick wall (grayish blue). A 275 mm insulation layer has bee
- Don’t save on the insulation @planning:thermal_protection
- el of thermal protection ^Typical old\\ external wall ^Moderately insulated\\ external wall^Good insulation^ ^Illustration|{{ :picopen:24_hlz.png }}|{{ :pic... ) | ^Annual demand for heating oil\\ (per 1 m² wall)(( Calculation basis: average location in Germany... ubic metre of fuel wood\\ for the whole external wall;\\ this can be provided for everyone\\ through su
- Dynamic simulation of a building's thermal performance @planning:calculating_energy_efficiency
- adiation in each period of time (nonlinear). The wall model uses not transfer functions but uses a forw... f simulated and measured temperatures within the wall), the focus is the whole building perspective (fi... The entire building defines the system boundary. All energy fluxes are part of the model, including all electric appliances. This makes it possible to simu
- Outdoor thermography @planning:thermal_protection:thermal_protection_works
- rared|infrared radiation (from Wikipedia)]] (IR). All objects surrounding us emit thermal radiation wit... ed_ir.png?463 }}|{{ :picopen:partially_insulated_wall.jpg?380 }}| |//**IR image taken during the applic... ffolding and the bags allow a good view of\\ the wall and will serve as points of reference for compari... eir emissivity. This value varies very little for all the\\ materials in this picture (except for the g
- Insulation vs. thermal mass @planning:thermal_protection:thermal_protection_works
- the effects of the thermal storage capacity of a wall and the heat gains from solar radiation are insufficiently, or not at all, taken into account by scientists. The author o... eantime, many new findings have become available, all of which support this publication. The full (Germ... And even after two weeks the temperature doesn't fall below 14°C. The few interior heat sources have a
- Airtightness and airtightness measurement @planning:refurbishment_with_passive_house_components:thermal_envelope
- t or “blower door test”) which determines the overall remaining leakage of a building. A fan is install... l_features_in_modernisations#literature|[Darup et all 2005] ]]). With professional planning and implem... plied by the clear room height. The volume in a wall that results from the installation of a window or... 29] ]]. The envelope surface is the total area of all floors, walls and ceilings that enclose the volum
- Energy balances - Background @planning:calculating_energy_efficiency
- d or cooled space" or more precisely: it includes all areas in a building in which comfortable thermal ... ould prevail. It is usually convenient to include all "passively heated" areas in the balance, if the b... on comfort conditions exists it is probably so small as to be of no practical significance."//\\ \\ ... (stationary) U-values be used in calculations at all? Isn't the heat storage more important than the
- Step-by-step Retrofits towards EnerPHit Standard in social housing in Spain @planning:refurbishment_with_passive_house_components
- fly. Moreover, these retrofits are performed by small companies where no qualified technicians are invo... , usually in the first winter season, because not all relevant factors had been considered in the plann... As the owner cannot afford to undertake the works all at once, the refurbishment will be performed step... ructure, insulation and airtightness • Exterior wall insulation and thermal bridges improving • Passi
- Compact HVAC systems @planning:building_services
- m the heat recovery device can also transport a small quantity of heat. Just 10 W/m² of fresh air that ... use, the heating power requirement is extremely small - so small that it can be met by the 10 W/m² provided by a supply air heating system. Similarly this c... more detail below. * ** Concept 1: Using a small exhaust air heat pump (compact heat pump unit)**
- Introduction: Retail stores as Passive Houses @planning:non-residential_passive_house_buildings
- il stores exist in many different sizes, from a small kiosk with just one person to large furniture sto... ly insulated building envelopes have to be cooled all throughout the year. Increasingly longer opening ... he primacy of economy will have to be accepted in all cases: turnover is all-important; attempts to reduce the energy demand of retail stores do not have to
- Types of ventilation @planning:building_services:ventilation:basics
- n - but it turns out that there is no conflict at all, if efficient components are used. ===== Ventila... gh leaks is not adequate in the heating period at all (see also [[Planning:Airtight construction]]): \\... for sufficient air exchange during periods with small windforces, intolerable draughts are still caused... ouse Institute shares this opinion, that first of all, air pollution should be limited at the source if
- Thermal protection and modernisation of existing buildings @planning:planning
- mplemented measures prove to be adequate. This is all the more important because subsequent "correction... resent, EnerPHit certification can be achieved if all energy related building components have been mode... es of the KfW-Bank show that approximately 2/3 of all funded projects consisted of single or multiple r... th a section of the building only, then including all or at least most components, the efficiency of a
- Overall retrofit plan for step-by-step retrofits to EnerPHit Standard @planning:refurbishment_with_passive_house_components
- ophit_logo.png|}}]] \\ \\ \\ \\ \\ ====== Overall retrofit plan for step-by-step retrofits to EnerP... ave been the focus of a consortium of 14 partners all across Europe. The share of step-by-step retrofit... components:** For example, Step 1 consist of the wall insulation; in Step 2, the windows will be replac... ed for will actually be achieved after completing all steps. The pre-certification can take place as so
- Economic analysis for the retrofit of a detached single family house to the EnerPHit standard @planning:refurbishment_with_passive_house_components
- ng to PHPP9 was 105kWh/(m².a). The cast concrete wall (already insulated internally by 10cm of mineral ... lystyrene (lambda 0.036W/m.K), then fixed to the wall with mortar glue and thermal bridge free dowels, ... nstalled flush on the outer face of the concrete wall and equipped with movable shutters. Existing shut... ernal walls to tape the membrane to the concrete wall. The house was equipped with a mechanical supply-
- Passive House Schools - Boundary Conditions @planning:non-residential_passive_house_buildings:passive_house_schools
- Baseline study - implementing the Passive House concept in hospitals @planning:non-residential_passive_house_buildings:ph_hospitals
- Internal heat gains in relation to living area @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- Energy use for heating in a well insulated new building @planning:thermal_protection:thermal_protection_works
- Refurbishment with Passive House components - introduction @planning:refurbishment_with_passive_house_components
- Component Award 2016: Affordable ventilation solutions for retrofits @planning:refurbishment_with_passive_house_components
- PHPP - validated and proven in practice @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- Passive House schools – How to go about it @planning:non-residential_passive_house_buildings:passive_house_schools
- Improving thermal bridges and airtightness in existing buildings @planning:refurbishment_with_passive_house_components:thermal_envelope
- Comparison of in-situ measurements and hygrothermal simulations of four different interior insulation systems @planning:thermal_protection:thermal_protection_works:comparison_of_in_situ_measurements_and_hygrothermal_simulations_of_four_different_interior_insulation_systems
- Building Integrated Photovoltaics (BIPV) in Step by Step Retrofitting Projects @planning:refurbishment_with_passive_house_components
- Step-by-step deep retrofit and building integrated façade/roof on a 'million program' house @planning:refurbishment_with_passive_house_components
- Energy efficiency in cafeterias and commercial kitchens @planning:non-residential_passive_house_buildings:cafeterias_and_commercial_kitchens
- Insulation measures for the external envelope @planning:refurbishment_with_passive_house_components:thermal_envelope
- Checklist: Test reports of airtightness measurements @planning:airtight_construction:general_principles
- Ventilation in commercial kitchens @planning:non-residential_passive_house_buildings:cafeterias_and_commercial_kitchens
- Aspects of efficient ventilation in hospitals @planning:non-residential_passive_house_buildings:ph_hospitals
- Floor Replacement: Svartbäcksvägen @planning:refurbishment_with_passive_house_components:thermal_envelope
- PHI window certification: previous success and new climate zones @planning:thermal_protection:windows:window_certification
- Comparison of energy performance of ventilation systems using passive vs. active heat recovery @planning:building_services:ventilation
- Passive House - 6 reasons why you still need opening windows @planning:building_services:ventilation
- PHPP calculations in hot and humid climates @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- The overall heat transfer coefficient or U-value @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- Passive House refurbishment - thermal envelope @planning:refurbishment_with_passive_house_components
- Calculation guide for temperature reduction factors to temperature zone "X" in the PHPP "Areas" worksheet @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- “designPH” plugin for Trimble Sketchup @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- Variant calculations and economic assessment with PHPP 9 @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- Experience with drain water heat recovery @planning:building_services:heating_and_dhw:experience_with_drain_water_heat_recovery
- Checklist for Design: Ventilation System in a residential Passive House Building @planning:building_services:ventilation