Fulltext results:
- Step-by-step Retrofits towards EnerPHit Standard in social housing in Spain
- ssues. Most of these social houses are not rented but owned. The fact each dwelling has a different own... he heating and cooling demands as far as possible but above all to increase the surface temperature, ra... ng is located outside the historical city centre, but this can be an additional difficulty in other cas... tment is reduced in the first step by about 70 %, but the impact on the entire building is minimal beca
- Airtightness and airtightness measurement @planning:refurbishment_with_passive_house_components:thermal_envelope
- rtight old buildings even at moderate wind speeds but during periods of mild and calm weather air flows... ior cladding, etc.) is used as an airtight layer, but care should be taken that it can be connected as ... ceed; it is not a question of the materials used, but rather an error in the specification of the airti... through the airtight layer in an aimless manner, but rather the planner should indicate clearly and un
- Refurbishment with Passive House components - introduction
- e Passive House components is not only economical but also preferable in all aspects. The economic sit... hile in that case). Not only are the profits safe but they are also tax-free as they are the result of ... is not only affordable, pleasant and comfortable, but also healthy.\\ \\ ===== See also ===== [[planni
- Improving thermal bridges and airtightness in existing buildings @planning:refurbishment_with_passive_house_components:thermal_envelope
- as other materials were also used (e.g. pumice), but the results are similar, and above all the modern... can also be applied in the case of old buildings; but there are some exceptions where a completely ther... , the same rules apply as for a new construction, but specific solutions needs to be worked out for a n
- Component Award 2016: Affordable ventilation solutions for retrofits
- reduce not only pressure losses during operation but also the initial work needed for installation. Co... ly air rooms into extract air rooms via hallways, but also, for instance, from bedrooms into living roo
- Building Integrated Photovoltaics (BIPV) in Step by Step Retrofitting Projects
- in Germany for mid and northern European climates but has spread around the world. It has been proved t... t only does it produce free clean energy on site, but also natural illumination is provided. Furthermor
- Step-by-step deep retrofit and building integrated façade/roof on a 'million program' house
- to be near net zero greenhouse emissions by 2050. But there is a lack of cost-effective solutions that ... tenance cost has not been investigated separately but it should be similar to that of a conventional fa
- Windows in a step-by-step retrofit
- installation thermal bridges and reveal shading, but installation in front of the wall leads to additi... ; condensate and mould are reliably avoided here, but the edge of the glass remains problematic.}}] ==
- Influence of retrofitting on daylighting @planning:refurbishment_with_passive_house_components:mechanical_systems
- help to keep artificial lighting usage very low. But retrofits to upgrade heat insulation can make bui... adds reveal shading and thus reduces daylighting. But this can be lowered by cutting back the window re
- Floor Replacement: Svartbäcksvägen @planning:refurbishment_with_passive_house_components:thermal_envelope
- foundation is still sitting directly on the rock, but with the insulation surrounding it, the (static m