Fulltext results:
- Comparison of energy performance of ventilation systems using passive vs. active heat recovery
- ====== Comparison of energy performance of ventilation systems using passive vs. active heat recovery ====... ion unit equipped with a passive heat recovery or energy recovery core (in the following: “passive system”... tem”). The goal of this article is to compare the energy consumption of passive and active systems for dif... ain supply air temperature and requires a certain energy demand for fans and frost protection. ^ City ^
- Types of ventilation @planning:building_services:ventilation:basics
- for ordinary new buildings. The issue here is not energy efficiency, but the health of the building's occu... Air Quality (IAQ) has a much higher priority than energy conservation - but it turns out that there is no ... tion takes place, the air will become too dry and energy consumption will become excessively high. => One... ss ventilation doesn't come into question because energy conservation should not mean less hygienic condit
- The ventilation system – there is no alternative
- y in any building – and, in addition to its small energy consumption, one of the Passive House’s many adva... a new construction or old building for reasons of energy conservation, e.g. by adding rubber sealing strips in the windows, will certainly lead to energy savings, but it will also increase the risk of po... thy indoor climate while allowing for significant energy savings; and once this requirement has been met,
- Air volumes @planning:building_services:ventilation:basics
- without ventilation systems), therefore it is not energy-relevant or practical! Of course, it is possible... s would have a restrictive effect (apart from the energy expenditure for transporting the air and the vent... or (increased effort for maintenance, hygiene and energy; see section about ventilation/humidity).\\ \\ =
- Passive House - 6 reasons why you still need opening windows
- not getting warm or requiring significantly more energy for heating due to users keeping the windows open... y negative effect is a slight increase in heating energy (see [[operation:operation_and_experience:user_be
- Differentiation between Vv and Vn50 values
- 1000|}} //**The air volume V<sub>v</sub>, is the energy reference area (Treated Floor Area, A<sub>TFA</su