Fulltext results:
- Internal heat gains in relation to living area @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- ng?nolink|}}]] \\ \\ \\ \\ \\ \\ ====== Internal heat gains in relation to living area ====== // New version of the standard assumptions for internal heat gains in residential buildings in the PHPP 9// \... ed a concept for new standard values for internal heat gains (IHG) in residential buildings [Grant 2014]... ng units (DU), as a result of which not only body heat from occupants but also the heat dissipated by el
- Energy balances - Background
- nal surface\\ of the insulation.**//|\\ \\ ===== Heat losses and heat gains ===== Let us look at a heat flow which travels out of the balance area through the envelope, e.g... which escapes through a window. At first such a heat loss would reduce the energy in the balance area;
- Dynamic simulation of a building's thermal performance
- ode, which are clearly separated from each other. Heat transmitted to interior surfaces is calculated de... e influence of wind speed are taken into account. Heat transfer (radiative and convective/conductive) an... . This makes it possible to simulate the internal heat gains. General assumptions on heat gains may be tolerable for energy inefficient buildings, but lead to
- PHPP – Passive House Planning Package
- hpp_-_the_passive_house_planning_package:internal_heat_gains_in_relation_to_living_area|]] ===== Contin... in_passive_houses|Explanation of the PHPP maximum heat load algorithm]] **[[http://www.passiv.de/litera... ad_in_passive_houses|How to calculate the maximum heat load]]** \\ ** Validation of the PHPP Energy Ba... ]] [[.:phpp_-_the_passive_house_planning_package:heat_pump_tool|Calculation tool for heat pumps]] {{:pi
- PHPP - validated and proven in practice @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- s, values of about 2.1 W/m² (±0.3) for **internal heat sources** are realistic during the heating period... s for more accurate determination of the internal heat sources of a specific building project. Assuming unrealistically high internal heat gains would result in unrealistically low values ... Source: [AkkP 20]//|\\ **Solar gains and internal heat sources make for a greater share of heat gains th
- “designPH” plugin for Trimble Sketchup @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- overwritten by the user if required. The external heat loss areas and treated floor area are collected a... ly complete, enabling a result for specific space heat demand to be calculated quickly, without the need... e to visually verify in the 3D model that all the heat-loss surfaces have been correctly taken into acco... ion of external shading objects * Rendering of heat-loss areas to indicate their area group or status
- Calculation guide for temperature reduction factors to temperature zone "X" in the PHPP "Areas" worksheet @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- exterior envelope of the buffer zone. Ventilation heat losses should also be considered, if relevant, th
- Variant calculations and economic assessment with PHPP 9 @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- input a single building with its geometry and the heat insulation properties of its building components