Fulltext results:
- Heated basement @basics:building_physics_-_basics:thermal_bridges:tbcalculation:examples
- oned linear thermal transmittance is given below. Here it should be mentioned that in the Ground workshe... n system however, Option B should also be applied here for determining the Ψ-values. {{ :picopen:beheiz... f the exterior wall can also be calculated easily here from the U-value and the adopted length. The cond... n practice, pre-prepared Excel templates are used here also for determining the Ψ-values. The heat flows
- Exterior wall on floor slab @basics:building_physics_-_basics:thermal_bridges:tbcalculation:examples
- rier or sealing layers.// For the example given here, the bottom concrete layer (layer number 19) is d... ext{m}$). $B' = 7{,}992 \, \text{m}$ was selected here (including the exterior wall) //[Note: With some ... package |PHPP]] calculation. In the example shown here, the length of the exterior wall is 2.03 m. The b... an enter the heat flows and the necessary lengths here and the desired Ψ-value is received as the result
- Thermal Bridges Catalogue
- arising from the use of the information presented here is therefore excluded. |[[https://database.passi... rmal Bridges Tool [[:planning:thermal_bridge_tool|here]]. {{:picopen:sinfonia_eu_phi.png?nolink&300}} ... See also ===== Click [[:planning:guides_and_aids|here]] to go back to the Guides and Aids click [[planning:tools|here]] to go to the "Tool" Further articles about [[
- Unheated basement @basics:building_physics_-_basics:thermal_bridges:tbcalculation:examples
- $L_{iu}$ were calculated with only 2 simulations here. In this case the desired heat flows must be dete... ext{m}^2\cdot \text{K}}{\text{W}}$ should be used here as well. <WRAP centeralign> **Determining the mi... circ C$, so a $f_{Rsi}$* factor can also be given here. ===== See also ===== * [[basics:building_phy
- Special features and characteristics of components in contact with the ground @basics:building_physics_-_basics:thermal_bridges:tbcalculation:ground_contact
- 5 °C (on 21.07) in the test reference years shown here only has an impact 91 days later at a depth of 5 m. Here the peak temperature was still 13.1 °C on 20.10.
- Definition and effects of thermal bridges
- s relating to the calculation of thermal bridges. Here, a thermal bridge is defined as follows (Section
- Basic principle for calculating thermal bridges @basics:building_physics_-_basics:thermal_bridges:tbcalculation
- The minimum surface temperature can then be read here; however this only refers to the respective tempe