Fulltext results:
- Dynamic simulation of a building's thermal performance
- he energy balance of a window surface depends not only on the component "window" itself, but also on the... model formation for the individual components: it only has to be guaranteed that the interactions betwee... for proving the validity of the model - they can only, hint to a progressive validation of physical mod... s completely superfluous (validation of models is only possible via measurements) - nor is it practical
- Energy balances - Background
- specific area. Consequently, energy balances can only be prepared for restricted spatial areas with cle... point: **The necessity for supplying heat arises only due to heat losses**. Because of the conservatio... surroundings.\\ \\ | **"Heating" therefore, is only a replacement of this heat loss \\ and can theref... ng Group Cost-efficient Passive Houses (in German only)]].\\ \\ - There are often critical remarks abo
- PHPP – Passive House Planning Package
- s|cooling demand [kWh/(m²a)]]] {{:picopen:members_only.png?20}} and maximum cooling load [W/m²]\\ * Summ... e_planning_package:solardhw|]] {{:picopen:members_only.png?25}} \\ [[.:phpp_-_the_passive_house_planning... on, Passive House Institute, Darmstadt 1997// \\ (only available in German) **[[http://www.passiv.de/li... on, Passive House Institute, Darmstadt 1998// \\ (only available in German); see e.g. [[:phi_publication
- Internal heat gains in relation to living area @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- ler dwelling units (DU), as a result of which not only body heat from occupants but also the heat dissip... service life of the building, therefore these are only estimated average values for the model shown here... ck of appliances in the preceding years therefore only allows limited statements to be made about electr... gnificantly heated up by the indoor space because only a small proportion of this remains in the pipes f
- PHPP - validated and proven in practice @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- al data) with the PHPP calculation.** \\ \\ It is only possible to compare average measured results from... on is not significant for ordinary buildings – it only affects buildings with extremely long time consta... on, Passive House Institute, Darmstadt 1997// \\ (only available in German) \\ **[[http://www.passiv.de... on, Passive House Institute, Darmstadt 1998// \\ (only available in German) \\ **[[http://www.passiv.de
- Calculation guide for temperature reduction factors to temperature zone "X" in the PHPP "Areas" worksheet @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- * For lower temperatures, e.g. the rooms are only kept frost-free, a reduction factor can be calcul... PHI. The tool uses a conservative approach and is only recommended for buildings, for which the influenc... P as adjacent to ambient air. ** 3. Zones heated only occasionally, but then with 20 °C : ** * __If heated only sporadically, e.g. once a month__: ignore heating
- PHPP calculations in hot and humid climates @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- P Active cooling algorithms]] {{:picopen:members_only.png?20|}} \\ [[planning:calculating_energy_effici... son with dynamic simulation]] {{:picopen:members_only.png?20|}} ===== Summary and Outlook ===== The u
- Variant calculations and economic assessment with PHPP 9 @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- ess. Looking at different designs in parallel was only possible by copying the PHPP project file once it... ex.php/de/product/view/10/270|Protokollband ]] //(only in German language)// des Arbeitskreises kostengü