Fulltext results:
- Internal heat gains in relation to living area @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- wn occupancy, equipment etc.) is naturally always possible. \\ \\ ==== 1 Occupancy in relation to living are... ased on [NRW 2011]|\\ From this data, it is thus possible to derive the individual amounts according to the... e PHPP. This is of significance because it is not possible to count the entire electricity consumption as in... lamps (fluorescent lamps as well as LED lamps are possible; older measurements still include a large proport
- Dynamic simulation of a building's thermal performance
- including all electric appliances. This makes it possible to simulate the internal heat gains. General assu... Darmstadt Kranichstein; see fif. 3). It had been possible to predict the energy consumptions, as well as to... pletely superfluous (validation of models is only possible via measurements) - nor is it practical and sensi... carefully observed during measurements - this is possible, but often increases the effort significantly bey
- Energy balances - Background
- solar energy can be estimated well enough, it is possible to calculate the remaining heat supply required (... s the active cooling sheet in PHPP.\\ It is also possible, to give an assessment of the thermal comfort if ... with caution – and in case of doubt, the largest possible reference area should be assumed for assessment. ... annual energy consumption. There is no confusion possible here at least for the reference size (as there is
- PHPP – Passive House Planning Package
- the energy balance of the building. This makes it possible to compare components of different qualities with... e based strictly on the laws of physics. Wherever possible, specific algorithms resort to current internatio
- PHPP - validated and proven in practice @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- ta) with the PHPP calculation.** \\ \\ It is only possible to compare average measured results from sufficie... ting that very low or even zero-energy houses are possible with moderate building standards. Practice has sh
- “designPH” plugin for Trimble Sketchup @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- d save time on data-entry and secondly that it is possible to visually verify in the 3D model that all the h
- Variant calculations and economic assessment with PHPP 9 @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package
- Looking at different designs in parallel was only possible by copying the PHPP project file once it had been