Fulltext results:
- Airtightness and airtightness measurement @planning:refurbishment_with_passive_house_components:thermal_envelope
- the volume to be tested in large buildings it is possible to divide the building into several zones and tes... ically feasible. In most buidlings it will not be possible to achieve a perfect airtight separation of the z... 95] ]]): \\ \\ ^1. The “pencil rule”: it must be possible to trace the airtight layer of the envelope in th... ction details should be as simple to carry out as possible * preferably **large uniform** areas with a si
- Windows in a step-by-step retrofit
- uld always be retrofitted simultaneously whenever possible. Where it is not possible, the following tips from the EuroPHit project are helpful. ===== 2. First window... olutions that are as affordable and functional as possible over the window’s lifecycle with consideration of... cant thermal bridge effect. As much insulation as possible should be used between the roller shutter box and
- Overall retrofit plan for step-by-step retrofits to EnerPHit Standard
- uilding as a Passive House or EnerPHit project is possible. Unlike for certifications of completed buildings... for each of the retrofit steps. By doing so it is possible to provide a comprehensive document to building o... for each of the retrofit steps. By doing so it is possible to provide a comprehensive document to building o
- Refurbishment with Passive House components - introduction
- improvement“ with justifiable effort: while it is possible to carry out the better measures today at low dif... shows how important it is to achieve the highest possible level of energy efficiency that is economically viable. Only then will it be possible to reduce energy consumption to a level which is
- Improving thermal bridges and airtightness in existing buildings @planning:refurbishment_with_passive_house_components:thermal_envelope
- mal bridges and improved airtightness ===== It is possible to transfer the planning principles for the new c... pletely thermal bridge free implementation is not possible with justifiable effort (e.g. basement plinth, pr... al component layers to each other, it will not be possible to achieve an adequate standard of airtightness.
- Prospects for the modernisation of existing buildings using highly efficient components
- the case of existing buildings it is usually not possible to achieve the Passive House Standard at reasonab... l burden. With the measures presented here, it is possible to achieve a considerable reduction in CO2 emissi
- Step-by-step Retrofits towards EnerPHit Standard in social housing in Spain
- e is the elimination of thermal bridges as far as possible. Most of the thermal bridges are eliminated by th... reduce the heating and cooling demands as far as possible but above all to increase the surface temperature
- Building Integrated Photovoltaics (BIPV) in Step by Step Retrofitting Projects
- electricity thanks to the sun. Furthermore, it is possible to recover the heat produced in the air chamber o
- Influence of retrofitting on daylighting @planning:refurbishment_with_passive_house_components:mechanical_systems
- of supplemental artificial light as accurately as possible. The results of this parameter study, which was b
- Crosstalk silencers @planning:refurbishment_with_passive_house_components:ventilation
- “house telephone”; in the living room it would be possible to hear every word spoken inside the bedroom and