Fulltext results:

Internal heat gains in relation to living area @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package

12 Hits, Last modified: 3 years ago

ion to living area ====== // New version of the standard assumptions for internal heat gains in residentia... Grant and Alan Clarke presented a concept for new standard values for internal heat gains (IHG) in residenti... t gains was devised below which will be used as a standard value for residential buildings in the PHPP 9 (20... or lower in individual cases. Nevertheless, such standard values are crucial for practical planning. An add

PHPP - validated and proven in practice @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package

7 Hits, Last modified: 7 months ago

and larger building projects in the Passive House Standard were built and monitored scientifically in 14 Eur... uses. Adjustments were made for the Passive House standard – i.e. for buildings which require very little en... slightly from that of the international ISO 13790 standard (European EN 832). However, the variation is not ... o differences in calculation results based on the standard and the PHPP which are rather significant for ene

Dynamic simulation of a building's thermal performance

5 Hits, Last modified: 4 years ago

hieved all year round depends on the (insulation) standard of the building in which the subsystem is used. ... (1) to relate to a building with Swedish building standard 1980 result in a saving of 5.6% with triple glazi... parison is impossible: the back calculation to a "standard climate" would have to be done using the theoreti... onsumption compared to the type "Swedish building standard 1980" developed from cumulative "small" changes).

Energy balances - Background

2 Hits, Last modified: 5 years ago

an be improved step by step and the Passive House Standard can eventually be achieved. Energy balances ca... artner /faktor 10/); for these, the Passive House Standard was used which is the balance with the smallest l

PHPP – Passive House Planning Package

2 Hits, Last modified: 7 months ago

sample detached house built to the Passive House Standard.// ** | \\ |{{:picopen:figure_2.10_flow_chart_... -2019.pdf |PHPP V9.6 Validation using ANSI/ASHRAE Standard 140-2017}} {{ :picopen:europhit_t2.4.2_report_ph

“designPH” plugin for Trimble Sketchup @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package

2 Hits, Last modified: 6 years ago

vides access to the functions of the tool via the standard Sketchup application menus, context menus and gra... components, with user-defined properties or from standard libraries * Simple energy balance within the t

Calculation guide for temperature reduction factors to temperature zone "X" in the PHPP "Areas" worksheet @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package

1 Hits, Last modified: 4 years ago

xtra PHPP. * For unheated staircases there are standard values in the PHPP manual. * For unheated cons

The overall heat transfer coefficient or U-value @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package

1 Hits, Last modified: 10 years ago

ivity values. The calculation strictly follows EN standard 6946 (background information on the Passipedia pa

Variant calculations and economic assessment with PHPP 9 @planning:calculating_energy_efficiency:phpp_-_the_passive_house_planning_package

1 Hits, Last modified: 5 years ago

combination of measures to achieve Passive House Standard for new builds as well. Up until now, users had t