Fulltext results:
- Insulation vs. thermal mass
- , many new findings have become available, all of which support this publication. The full (German) versi... something can be said about the reliability with which energy can be saved through better insulation. In... nsignificant effect with very small energy gains, which is reduced even more by the heat radiation into t... harge ===== An uninsulated hot water bottle (one which is not under a well-insulating duvet) releases it
- Outdoor thermography
- ange is that part of the invisible light spectrum which is adjacent to the red end of the visible light r... rd long-wave thermal radiation and produce images which similar to photographs – the only difference bein... d radiation with a wavelength between 8 and 15 µm which allows for conclusions to be drawn regarding the ... rey) as well as the insulation panels (dark grey) which have\\ already been applied from the bottom to th
- Insulation works – Evidence no.1 "Measurements at a highly insulated wall"
- .\\ The diagram contains many interesting details which will be explained in the text below.**\\ //|\\ \\... age, these values are represented by three curves which are relatively close together: inside the interna... the heat is radiated towards the window surfaces which have cooled down during the night. * From ... only indirectly by heat radiating from the floor which is now directly hit by the sun. Yet, even then th
- Energy use for heating in a well insulated new building
- at gains, the actual heat losses may exceed those which have initially been calculated based on the setpoint temperature. The degree to which solar heat gains can be used can be determined us... formula included in the EN 832 standard, a method which has proven to be highly effective. It is mostly b... the U-values of the exterior building components which are used to calculate the heat losses shown on th
- Thermal protection in retrofits
- ior plaster can be seen as well as the insulation which\\ is fitted tightly under the window sill. You ca... and in some cases it was reduced to 15 kWh/(m²a), which is the Passive House standard value for new const... ave to be\\ balanced by the heating system (red), which gives an energy\\ consumption of more than 200 kW... nsumption for the first year was 26.9 kWh/(m²a) - which confirms the calculation results for the project.
- Comparison of in-situ measurements and hygrothermal simulations of four different interior insulation systems @planning:thermal_protection:thermal_protection_works:comparison_of_in_situ_measurements_and_hygrothermal_simulations_of_four_different_interior_insulation_systems
- f the simulation reproduces the reality correctly which is checked in the following. \\ \\ ===== Read mo